> **Attention: Never use this puppet module on systems which have been previously configured manually. It is impossible to predict how and what would have been configured, hence previous configurations outside the scope of this module may be overwritten! Automated configurations require a test environment to verify that the module suits the purpose intended by the user, as well as tune the parameters, before deploying into live production**
> Note: The value for the `nagios_server` variable is derived from a global parameter set in Foreman (`nagios_server`), because the parameter is used across multiple modules. You need to set that manually in Foreman under "Global Parameters". Same for `nagios_source`, the value for the firewall source, which should point to the source IP or source range for the nagios server querying NRPE.
`confdroid_nrpe` does typically not need to be specifically declared. It will be auto-required by `cd_nagios` with default settings. Only if you want to override settings declare it specifically.
In order to apply parameters through Foreman, **confdroid_nrpe::params**- must be added to the host or host group in question, unless the defaults are fully acceptable across the estate.
In order to connect a Nagios monitoring server to clients through NRPE, you must define commands and the desired argument strings on the clients. The default NRPE installation comes with a few examples of such commands, which are also included in this module. However, every environment is very different in their requirements and Nagios via Puppet is all about the ability to dynamically set command arguments based on default variables / overrides. For that reason no hard-coded commands are included, but instead all commands are set via argument strings, where possible.
It is very recommendable to define such commands directly within Puppet modules or profiles, so any node running the particular service controlled by the module will automatically get the required check commands defined as well, while nodes not running the service also do not contain the command check. The same then is true for Nagios checks, so you would have both the NRPE command definition and the Nagios check contained in Puppet modules or profiles to have it in one location.
When `ne_enable_ssl` is enabled, the certificates for the ca (root if standalone or intermediate), the nagios server and the key for the nagios server have to be provided through the following values:
-`CHECK_NRPE: Unable to read output`: Nagios sudo access also needs Selinux to allow this. Default settings in this module take care for both through `$ne_allow_sudo` and `$ne_include_selinux`.
-`CHECK_NRPE: Receive header underflow - only 0 bytes received (4 expected)`: This is down to the new illegal meta characters feature via `nasty_metachars`, i.e. if you included an additional character which actually be part of a check, or if a custom check contains a default illegal character.
-`--no-variable_scope-check`: not applicable as we are inheriting parameters from params class. the lint check does not distinguish between facts and inherited parameters.
ConfDroid as entity is entirely independent from Puppet. We provide custom configuration modules, written for specific purposes and specific environments.
The modules are tested and supported only as documented, and require testing in designated environments (i.e. lab or development environments) for parameter tuning etc. before deploying into production environments.
