finished params for nagios.cfg
This commit is contained in:
Arne Teuke
@@ -39,7 +39,7 @@
|
||||
# overridden on host level.
|
||||
# @param [string] ng_ping_crit Default value for ping critical check. Can be
|
||||
# overridden on host level.
|
||||
# @param [boolean] ng_ping_ensure Wheter to include or exclude the check.
|
||||
# @param [boolean] ng_ping_ensure Whether to include or exclude the check.
|
||||
# Can be overridden on host level.
|
||||
# @param [string] ng_disk_warn Default value for disk space warning check.
|
||||
# Can be overridden on host level.
|
||||
@@ -108,8 +108,8 @@
|
||||
# interface for hosts/services that have not yet been checked
|
||||
# @param [string] ng_use_auth whether or not the CGIs will use any
|
||||
# authentication when displaying host and service information, as
|
||||
# well as committing commands to Nagios for processing. This should **__not__**
|
||||
# be set to 0.
|
||||
# well as committing commands to Nagios for processing. This should
|
||||
# **__not__** be set to 0.
|
||||
# @param [string] ng_use_ssl_auth allows you to use x509 cert (SSL)
|
||||
# authentication in the CGIs. This is an advanced option and should
|
||||
# not be enabled unless you know what you're doing.
|
||||
@@ -120,11 +120,11 @@
|
||||
# secure domain (i.e., behind a firewall) to see the current status
|
||||
# without authenticating. Only actuve if `ng_enable_def_user` is set to `true`
|
||||
# @param [string] ng_nagios_admin Specify the name of a nagios administration
|
||||
# user here. Value will be used in cgi.cfg for all authorized commands and info,
|
||||
# i.e. nagiosadmin. however, its stronlgly suggested to use a different name.
|
||||
# Can be overridden per host / hostgroups, so allows flexibility and increased
|
||||
# security. You can also add a comma-separated list of people in here instead,
|
||||
# which then would function like a group instead a single user.
|
||||
# user here. Value will be used in cgi.cfg for all authorized commands and
|
||||
# info,i.e. nagiosadmin. however, its stronlgly suggested to use a different
|
||||
# name. Can be overridden per host / hostgroups to allow flexibility and
|
||||
# increased security. You can also add a comma-separated list of people in
|
||||
# here instead, which then would function like a group instead a single user.
|
||||
# @param [string] ng_sysinfo_auth comma-delimited list of all usernames that
|
||||
# have access to viewing the Nagios process information as
|
||||
# provided by the Extended Information CGI (extinfo.cgi).
|
||||
@@ -196,16 +196,20 @@
|
||||
# policies. only effective if selinux is enabled.
|
||||
# @param [string] ng_required_hosts String of **__FQDNs__** for hosts which
|
||||
# should be allowed/required. Requires format
|
||||
# 'host1.example.com host2.example.com'. If you want no restriction, chose 'all'.
|
||||
# @param [string] ng_required_ips string of **__Ip addresses __** for hosts which
|
||||
# should be allowed/reqired. Requires format 'ipaddress ip address range'.
|
||||
# If you want no restriction, choose '0.0.0.0/0'
|
||||
# 'host1.example.com host2.example.com'. If you want no restriction, chose
|
||||
# 'all'.
|
||||
# @param [string] ng_required_ips string of **__Ip addresses __** for hosts
|
||||
# which should be allowed/reqired. Requires format 'ipaddress ip address
|
||||
# range'. If you want no restriction, choose '0.0.0.0/0'.
|
||||
# @param [boolean] ng_enable_certbot Whether to use certbot for automated TLS
|
||||
# certificate management
|
||||
# @param [string] ng_certbot_webroot the path for certbot to place
|
||||
# challenges for the certification process.
|
||||
# @param [string] ng_mail_user email address to receive administrative mail.
|
||||
# used for nagios itself as well as for certbot.
|
||||
# used for nagios itself as well as for certbot. Mail environment must be
|
||||
# configured separately, i.e. through `cd_postfix`.
|
||||
# @param [string] ng_page_user pager address to be used by Nagios for
|
||||
# notifications. Paging environment must be configured separately.
|
||||
# @param [boolean] ng_enable_index Whether to create an index file to allow
|
||||
# httpd checks with nagios on the nagios server.
|
||||
# @param [string] ng_webserver_name the name of the web server nagios should
|
||||
@@ -231,8 +235,8 @@
|
||||
# by `ng_command_file`.
|
||||
# @param [string] ng_command_file file that Nagios checks for external command
|
||||
# requests. It is also where the command CGI will write commands that are
|
||||
# submitted # by users, so it must be writeable by the user that the web server
|
||||
# is running as.
|
||||
# submitted # by users, so it must be writeable by the user that the web
|
||||
# server is running as.
|
||||
# @param [boolean] ng_enable_query_handler Whether to enable the query handler
|
||||
# for running nagios in cluster mode.
|
||||
# @param [string] ng_query_socket the socket for the query handler
|
||||
@@ -335,9 +339,9 @@
|
||||
# this option may result in inaccurate service states being used by Nagios,
|
||||
# while a lower value may result in a performance hit for service checks.
|
||||
# Use a value of 0 to disable service check caching.
|
||||
# @param [string] ng_pred_host_dep_checks Whether Nagios will attempt to execute
|
||||
# checks of hosts when it predicts that future dependency logic test may be
|
||||
# needed. Valid options are `0` and `1`.
|
||||
# @param [string] ng_pred_host_dep_checks Whether Nagios will attempt to
|
||||
# execute checks of hosts when it predicts that future dependency logic test
|
||||
# may be needed. Valid options are `0` and `1`.
|
||||
# @param [string] ng_pred_svc_dep_checks Whether Nagios will attempt to execute
|
||||
# checks of services when it predicts that future dependency logic test may be
|
||||
# needed. Valid options are `0` and `1`.
|
||||
@@ -357,6 +361,281 @@
|
||||
# (in seconds) that # Nagios will look at when automatically rescheduling
|
||||
# checks. Only host and service checks that occur in the next X seconds
|
||||
# (determined by this variable) will be rescheduled.
|
||||
# @param [string] ng_service_check_timeout how much time Nagios will allow
|
||||
# service check commands to execute before killing them off.
|
||||
# @param [string] ng_host_check_timeout how much time Nagios will allow
|
||||
# host check commands to execute before killing them off.
|
||||
# @param [string] ng_event_handler_timeout how much time Nagios will allow
|
||||
# event handler commands to execute before killing them off.
|
||||
# @param [string] ng_notification_timeout how much time Nagios will allow
|
||||
# notification commands to execute before killing them off.
|
||||
# @param [string] ng_ocsp_timeout how much time Nagios will allow
|
||||
# ocsp commands to execute before killing them off.
|
||||
# @param [string] ng_perfdata_timeout how much time Nagios will allow
|
||||
# performance data commands to execute before killing them off.
|
||||
# @param [string] ng_retain_state_inf Whether Nagios will save state
|
||||
# information for services and hosts before it shuts down. Upon
|
||||
# startup Nagios will reload all saved service and host state information
|
||||
# before starting to monitor. Valid options are `0` and `1`.
|
||||
# @param [string] ng_state_retention_file Where Nagios should use to store
|
||||
# host and # service state information before it shuts down. The state
|
||||
# information in this file is also read immediately prior to starting to
|
||||
# monitor the network when Nagios is restarted. This file is used only if
|
||||
# the `ng_retain_state_inf` variable is set to 1.
|
||||
# @param [string] ng_retention_update_intval how often (in minutes) that
|
||||
# Nagios # will automatically save retention data during normal operation.
|
||||
# If you set this value to 0, Nagios will not save retention data at regular
|
||||
# interval, but it will still save retention data before shutting down or
|
||||
# restarting. If you have disabled state retention, this option has no effect.
|
||||
# @param [string] ng_use_ret_program_state Whether Nagios will set
|
||||
# program status variables based on the values saved in the retention file.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_use_ret_scheduling_info Whether Nagios will retain
|
||||
# the scheduling info (next check time) for hosts and services based on the
|
||||
# values saved in the retention file. Valid options are `0` and `1`.
|
||||
# @param [string] ng_ret_host_attr_mask mask determines what host
|
||||
# attributes are not retained
|
||||
# @param [string] ng_ret_service_attr_mask mask determines what service
|
||||
# attributes are not retained
|
||||
# @param [string] ng_ret_proc_host_attr_mask what host process attributes
|
||||
# are not retained.
|
||||
# @param [string] ng_ret_proc_svc_attr_mask what service process attributes
|
||||
# are not retained
|
||||
# @param [string] ng_ret_contact_h_attr_mask what host contact attributes are
|
||||
# not retained.
|
||||
# @param [string] ng_ret_contact_s_attr_mask what service contact attributes
|
||||
# are not retained.
|
||||
# @param [string] ng_interval_length seconds per unit interval as used in the
|
||||
# host/contact/service configuration files.
|
||||
# @param [string] ng_check_for_updates whether Nagios will automatically check
|
||||
# to see if new updates (releases) are available. Effectively, setting
|
||||
# `$pkg_ensure` to `latest` will have Puppet take care for that automatically
|
||||
# though through the packages available in the yum repos.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_bare_update_check what data Nagios will send to
|
||||
# api.nagios.org when it checks for updates. Valid options are `0` and `1`.
|
||||
# @param [string] ng_use_aggr_host_checking Whether to enable aggressive host
|
||||
# checking. Read Nagios documentation for more infos aggressive host checking.
|
||||
# @param [string] ng_execute_service_checks Whether Nagios will actively
|
||||
# execute service checks when it initially starts.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_accept_pass_svc_checks Whether or not Nagios will accept
|
||||
# passive # service checks results when it initially (re)starts.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_execute_host_checks whether or not Nagios will actively
|
||||
# execute host checks when it initially starts.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_accept_pass_host_checks Whether or not Nagios will accept
|
||||
# passive # host checks results when it initially (re)starts.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_enable_notifications Whether Nagios will sent out any host
|
||||
# or service notifications when it is initially (re)started.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_enable_event_handlers Whether Nagios will run any host or
|
||||
# service event handlers when it is initially (re)started.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_process_perf_data Whether Nagios will process performance
|
||||
# data returned from service and host checks.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_host_perfdata_command Short name of a command definition
|
||||
# defined in your host configuration file. Only active if
|
||||
# `ng_process_perf_data` is set to `1`
|
||||
# @param [string] ng_svc_perfdata_command Short name of a command definition
|
||||
# defined in your service configuration file. Only active if
|
||||
# `ng_process_perf_data` is set to `1`
|
||||
# @param [string] ng_host_perfdata_file used to store host performance data.
|
||||
# Only active if `ng_process_perf_data` is set to `1`
|
||||
# @param [string] ng_service_perfdata_file used to store service performance
|
||||
# data. Only active if `ng_process_perf_data` is set to `1`
|
||||
# @param [string] ng_host_perfdata_template What data is written (and how)
|
||||
# to the performance data files. The templates may contain macros, special
|
||||
# characters (\t for tab, \r for carriage return, \n for newline)
|
||||
# and plain text. Only active if `ng_process_perf_data` is set to `1`
|
||||
# @param [string] ng_svc_perfdata_template What data is written (and how)
|
||||
# to the performance data files. The templates may contain macros, special
|
||||
# characters (\t for tab, \r for carriage return, \n for newline)
|
||||
# and plain text. Only active if `ng_process_perf_data` is set to `1`
|
||||
# @param [string] ng_host_perfdata_file_mode Whether the host performance data
|
||||
# files are opened in write ("w"), append ("a") or named pipe ("p") mode.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_svc_perfdata_file_mode Whether the service performance
|
||||
# data files are opened in write ("w"), append ("a") or named pipe ("p") mode.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_h_perfdata_proc_intval How often (in seconds) the host
|
||||
# performance data files are processed using the commands defined below.
|
||||
# `0` indicates that the files should not be periodically processed.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_s_perfdata_proc_intval How often (in seconds) the service
|
||||
# performance data files are processed using the commands defined below.
|
||||
# `0` indicates that the files should not be periodically processed.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_h_perfdata_proc_cmd Commands used to periodically process
|
||||
# the host performance data files.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_s_perfdata_proc_cmd Commands used to periodically process
|
||||
# the service performance data files.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_h_perfdata_proc_e_res Whether the core will process empty
|
||||
# host perfdata results. Valid options are `0` and `1`.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_s_perfdata_proc_e_res Whether the core will process empty
|
||||
# service perfdata results. Valid options are `0` and `1`.
|
||||
# Only active if `ng_process_perf_data` is set to `1`.
|
||||
# @param [string] ng_obsess_over_services Whether Nagios will obsess over
|
||||
# service checks and run the ocsp_command defined. Unless you are
|
||||
# planning on implementing distributed monitoring, do not enable this option.
|
||||
# @param [string] ng_ocsp_command Command that is run for every service check
|
||||
# that is processed by Nagios. This command is executed only if the
|
||||
# `ng_obsess_over_services` option is set to 1. The command argument is the
|
||||
# short name of a command definition defined in your service configuration
|
||||
# file. Read the HTML docs for # more information on implementing distributed
|
||||
# monitoring.
|
||||
# @param [string] ng_obsess_over_hosts Whether Nagios will obsess over
|
||||
# host checks and run the ocsp_command defined. Unless you are
|
||||
# planning on implementing distributed monitoring, do not enable this option.
|
||||
# @param [string] ng_ochp_command Command that is run for every service check
|
||||
# that is processed by Nagios. This command is executed only if the
|
||||
# `ng_obsess_over_hosts` option is set to 1. The command argument is the
|
||||
# short name of a command definition defined in your host configuration file.
|
||||
# Read the HTML docs for # more information on implementing distributed
|
||||
# monitoring.
|
||||
# @param [string] ng_translate_pass_h_checks Whether or not Nagios will
|
||||
# translate # DOWN/UNREACHABLE passive host check results into their proper
|
||||
# state for this instance of Nagios. This option is useful only if you have
|
||||
# distributed or failover monitoring setup. Valid options are `0` and `1`.
|
||||
# @param [string] ng_check_orphaned_svc Whether Nagios will periodically check
|
||||
# for orphaned service checks.Valid options are `0` and `1`.
|
||||
# @param [string] ng_check_orphaned_hosts Whether Nagios will periodically
|
||||
# check for orphaned host checks.Valid options are `0` and `1`.
|
||||
# @param [string] ng_check_service_freshness Whether Nagios will periodically
|
||||
# check the "freshness" of service results. Valid options are `0` and `1`.
|
||||
# @param [string] ng_svc_fresh_check_intval how often (in seconds) Nagios will
|
||||
# check the "freshness" of service check results. Only active if
|
||||
# `ng_check_service_freshness` is set to `1`.
|
||||
# @param [string] ng_svc_check_timeout_state The state Nagios will report when
|
||||
# a service check times out - that is does not respond within
|
||||
# `ng_service_check_timeout` seconds. Valid settings are:
|
||||
# c - Critical (default)
|
||||
# u - Unknown
|
||||
# w - Warning
|
||||
# o - OK
|
||||
# @param [string] ng_check_host_freshness Whether Nagios will periodically
|
||||
# check the "freshness" of host check results. Valid options are `0` and `1`.
|
||||
# @param [string] ng_host_fresh_check_intval how often (in seconds) Nagios
|
||||
# will check the "freshness" of host check results. Only active if
|
||||
# `ng_check_service_freshness` is set to `1`.
|
||||
# @param [string] ng_add_freshness_latency number of seconds that Nagios will
|
||||
# add to any host and service freshness thresholds that it calculates
|
||||
# (those not explicitly specified by the user).
|
||||
# @param` [string] ng_enable_flap_detection Whether or not Nagios will try
|
||||
# and detect hosts and services that are "flapping". Flapping occurs when a
|
||||
# host or service changes between # states too frequently. When Nagios
|
||||
# detects that a # host or service is flapping, it will temporarily suppress
|
||||
# notifications for that host/service until it stops flapping.
|
||||
# @param [string] ng_low_svc_flap_threshold Low threshold for service flapping.
|
||||
# only active if `ng_enable_flap_detection` is set to `1`.
|
||||
# @param [string] ng_high_svc_flap_threshold High threshold for service
|
||||
# flapping. Only active if `ng_enable_flap_detection` is set to `1`.
|
||||
# @param [string] ng_low_h_flap_threshold Low threshold for host flapping.
|
||||
# only active if `ng_enable_flap_detection` is set to `1`.
|
||||
# @param [string] ng_high_h_flap_threshold High threshold for host
|
||||
# flapping. Only active if `ng_enable_flap_detection` is set to `1`.
|
||||
# @param [string] ng_date_format How short dates are displayed.
|
||||
# Valid options include:
|
||||
# us (MM-DD-YYYY HH:MM:SS)
|
||||
# euro (DD-MM-YYYY HH:MM:SS)
|
||||
# iso8601 (YYYY-MM-DD HH:MM:SS)
|
||||
# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
|
||||
# @param [boolean] ng_use_timezone_offset Whether to use timezone offsets.
|
||||
# if set to `false`, the system configured timezone will be used.
|
||||
# @param [string] ng_use_timezone used to override the default timezone that
|
||||
# this # instance of Nagios runs in. If not specified, Nagios will use the
|
||||
# system configured timezone. NOTE: In order to display the correct timezone
|
||||
# in the CGIs, you # will also need to alter the Apache directives for the
|
||||
# CGI path # to include your timezone. It is highly recommended to configure
|
||||
# the timezone correctly at system level anyway. Only active if
|
||||
# `ng_use_timezone_offset` is set to `true`.
|
||||
# @param [string] ng_illegal_obj_name_chars specify illegal characters that
|
||||
# cannot # be used in host names, service descriptions, or names of other
|
||||
# object types.
|
||||
# @param [string] ng_ill_macro_output_chars Specify illegal characters that
|
||||
# are stripped from macros before being used in notifications, event handlers,
|
||||
# etc. This DOES NOT affect macros used in service or host check commands.
|
||||
# The following macros are stripped of the characters you specify:
|
||||
# $HOSTOUTPUT$
|
||||
# $HOSTPERFDATA$
|
||||
# $HOSTACKAUTHOR$
|
||||
# $HOSTACKCOMMENT$
|
||||
# $SERVICEOUTPUT$
|
||||
# $SERVICEPERFDATA$
|
||||
# $SERVICEACKAUTHOR$
|
||||
# $SERVICEACKCOMMENT$
|
||||
# @param [string] ng_use_regexp_matching Whether regular expression
|
||||
# matching takes place in the object config files. Regular expression
|
||||
# matching is used to match host, hostgroup, service, and service group
|
||||
# names/descriptions in some fields of various object types.
|
||||
# Valid options are `0` and `1`.
|
||||
# @param [string] ng_true_regexp_matching Whether or not "true" regular
|
||||
# expression # matching takes place in the object config files. Only active if
|
||||
# `ng_use_regexp_matching` is set to true.
|
||||
# @param [string] ng_daemon_dumps_core Whether Nagios is allowed to create
|
||||
# a core dump when it runs as a daemon.
|
||||
# @param [string] ng_use_large_inst_tweaks Whether or not Nagios will take some
|
||||
# shortcuts # which can save on memory and CPU usage in large Nagios
|
||||
# installations. Valid options are `0` or `1`.
|
||||
# @param [string] ng_enable_env_macros Whether Nagios will make all standard
|
||||
# macros available as environment variables when host/service checks and
|
||||
# system commands (event handlers, notifications, etc.) are executed. Can
|
||||
# cause performance problems in large installations if enabled.
|
||||
# Valid options are `0` or `1`.
|
||||
# @param [string] ng_child_proc_fork_twice ow Nagios will fork child processes.
|
||||
# Valid options are `0` or `1`.
|
||||
# @param [string] ng_debug_level how much (if any) debugging information will
|
||||
# be written to the debug file. Valid options are:
|
||||
# -1 = Everything
|
||||
# 0 = Nothing
|
||||
# 1 = Functions
|
||||
# 2 = Configuration
|
||||
# 4 = Process information
|
||||
# 8 = Scheduled events
|
||||
# 16 = Host/service checks
|
||||
# 32 = Notifications
|
||||
# 64 = Event broker
|
||||
# 128 = External commands
|
||||
# 256 = Commands
|
||||
# 512 = Scheduled downtime
|
||||
# 1024 = Comments
|
||||
# 2048 = Macros
|
||||
# @param [string] ng_debug_verbosity How verbose the debug log out will be.
|
||||
# Valid options:
|
||||
# 0 = Brief output
|
||||
# 1 = More detailed
|
||||
# 2 = Very detailed
|
||||
# @param [string] ng_max_debug_file_size Maximum size (in bytes) of the debug
|
||||
# file. If the file grows larger than this size, it will be renamed with
|
||||
# a .old # extension. If a file already exists with a .old extension it will
|
||||
# automatically be deleted.
|
||||
# @param [string] ng_allow_empty_hostgroups Should we allow hostgroups to have
|
||||
# no hosts, we default this to off since that was the old behavior.
|
||||
# @param [string] ng_check_workers Normally worker count is dynamically
|
||||
# allocated based on 1.5 * number of cpu's with a minimum of 4 workers.
|
||||
# This value will override the defaults.
|
||||
# @param [string] ng_host_down_svc_checks This option will disable all service
|
||||
# checks if the host is not in an UP state. While desirable in some
|
||||
# environments, enabling this value can distort report values as the expected
|
||||
# quantity of checks will not have been performed. Valid options are `0` and
|
||||
# `1`.
|
||||
# @param [boolean] ng_enable_load_ctl_options Whether to enable loadctl_options
|
||||
# To get current defaults based on your system issue a command to
|
||||
# the query handler. Experiemental feature and not recomended for production.
|
||||
# param [string] ng_loadctl_options load controlling options
|
||||
# jobs_max - The maximum amount of jobs to run at one time
|
||||
# jobs_min - The minimum amount of jobs to run at one time
|
||||
# jobs_limit - The maximum amount of jobs the current load lets us run
|
||||
# backoff_limit - The minimum backoff_change
|
||||
# backoff_change - # of jobs to remove from jobs_limit when backing off
|
||||
# rampup_limit - Minimum rampup_change
|
||||
# rampup_change - # of jobs to add to jobs_limit when ramping up
|
||||
###############################################################################
|
||||
class cd_nagios::params (
|
||||
|
||||
@@ -365,6 +644,7 @@ $pkg_ensure = 'latest',
|
||||
$ng_nagios_server = "nagios.${::domain}",
|
||||
$ng_nagios_ext_ip = undef,
|
||||
$ng_mail_user = "admin@${::domain}",
|
||||
$ng_page_user = "pageadmin@${::domain}",
|
||||
|
||||
$ng_include_nrpe = true,
|
||||
|
||||
@@ -524,7 +804,88 @@ $ng_time_change_threshold = '900',
|
||||
$ng_auto_reschedule_checks = '0',
|
||||
$ng_auto_reschedule_intval = '30',
|
||||
$ng_auto_reschedule_window = '180',
|
||||
|
||||
$ng_service_check_timeout = '60',
|
||||
$ng_host_check_timeout = '30',
|
||||
$ng_event_handler_timeout = '30',
|
||||
$ng_notification_timeout = '30',
|
||||
$ng_ocsp_timeout = '5',
|
||||
$ng_perfdata_timeout = '5',
|
||||
$ng_retain_state_inf = '1',
|
||||
$ng_state_retention_file = '/var/spool/nagios/retention.dat',
|
||||
$ng_retention_update_intval = '60',
|
||||
$ng_use_ret_program_state = '1',
|
||||
$ng_use_ret_scheduling_info = '1',
|
||||
$ng_ret_host_attr_mask = '0',
|
||||
$ng_ret_service_attr_mask = '0',
|
||||
$ng_ret_proc_host_attr_mask = '0',
|
||||
$ng_ret_proc_svc_attr_mask = '0',
|
||||
$ng_ret_contact_h_attr_mask = '0',
|
||||
$ng_ret_contact_s_attr_mask = '0',
|
||||
$ng_interval_length = '60',
|
||||
$ng_check_for_updates = '1',
|
||||
$ng_bare_update_check = '0',
|
||||
$ng_use_aggr_host_checking = '0',
|
||||
$ng_execute_service_checks = '1',
|
||||
$ng_accept_pass_svc_checks = '1',
|
||||
$ng_execute_host_checks = '1',
|
||||
$ng_accept_pass_host_checks = '1',
|
||||
$ng_enable_notifications = '1',
|
||||
$ng_enable_event_handlers = '1',
|
||||
$ng_process_perf_data = '0',
|
||||
$ng_host_perfdata_command = 'process-host-perfdata',
|
||||
$ng_svc_perfdata_command = 'process-service-perfdata',
|
||||
$ng_host_perfdata_file = '/var/spool/nagios/host-perfdata',
|
||||
$ng_service_perfdata_file = '/var/spool/nagios/service-perfdata',
|
||||
$ng_host_perfdata_template = '[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$',
|
||||
$ng_svc_perfdata_template = '[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$',
|
||||
$ng_host_perfdata_file_mode = 'a',
|
||||
$ng_svc_perfdata_file_mode = 'a',
|
||||
$ng_h_perfdata_proc_intval = '0',
|
||||
$ng_s_perfdata_proc_intval = '0',
|
||||
$ng_h_perfdata_proc_cmd = 'process-host-perfdata-file',
|
||||
$ng_s_perfdata_proc_cmd = 'process-service-perfdata-file',
|
||||
$ng_h_perfdata_proc_e_res = '1',
|
||||
$ng_s_perfdata_proc_e_res = '1',
|
||||
$ng_obsess_over_services = '0',
|
||||
$ng_ocsp_command = '',
|
||||
$ng_obsess_over_hosts = '0',
|
||||
$ng_ochp_command = '',
|
||||
$ng_translate_pass_h_checks = '0',
|
||||
$ng_pass_h_checks_are_soft = '0',
|
||||
$ng_check_orphaned_svc = '1',
|
||||
$ng_check_orphaned_hosts = '1',
|
||||
$ng_check_service_freshness = '1',
|
||||
$ng_svc_fresh_check_intval = '60',
|
||||
$ng_svc_check_timeout_state = 'c',
|
||||
$ng_check_host_freshness = '0',
|
||||
$ng_host_fresh_check_intval = '60',
|
||||
$ng_add_freshness_latency = '15',
|
||||
$ng_enable_flap_detection = '1',
|
||||
$ng_low_svc_flap_threshold = '5.0',
|
||||
$ng_high_svc_flap_threshold = '20.0',
|
||||
$ng_low_h_flap_threshold = '5.0',
|
||||
$ng_high_h_flap_threshold = '20.0',
|
||||
$ng_date_format = 'us',
|
||||
$ng_use_timezone_offset = false,
|
||||
$ng_use_timezone = '',
|
||||
$ng_illegal_obj_name_chars = '`~!$%^&*|\'"<>?,()=',
|
||||
$ng_ill_macro_output_chars = '`~$&|\'"<>',
|
||||
$ng_use_regexp_matching = '0',
|
||||
$ng_true_regexp_matching = '0',
|
||||
$ng_daemon_dumps_core = '0',
|
||||
$ng_use_large_inst_tweaks = '0',
|
||||
$ng_enable_env_macros = '0',
|
||||
$ng_free_child_process_mem = '1',
|
||||
$ng_child_proc_fork_twice = '1',
|
||||
$ng_debug_level = '0',
|
||||
$ng_debug_verbosity = '1',
|
||||
$ng_debug_file = '/var/spool/nagios/nagios.debug',
|
||||
$ng_max_debug_file_size = '1000000',
|
||||
$ng_allow_empty_hostgroups = '0',
|
||||
$ng_check_workers = '',
|
||||
$ng_host_down_svc_checks = '0',
|
||||
$ng_enable_load_ctl_options = false,
|
||||
$ng_loadctl_options = 'jobs_max=100;backoff_limit=10;rampup_change=5',
|
||||
) {
|
||||
|
||||
# installation section
|
||||
@@ -533,7 +894,11 @@ $ng_auto_reschedule_window = '180',
|
||||
/(?i-mx:centos|fedora|redhat)/ => ['nagios','nagios-devel']
|
||||
}
|
||||
$reqpackages_client = $::operatingsystem ? {
|
||||
/(?i-mx:centos|fedora|redhat)/ => ['net-snmp-utils','nagios-plugins','nagios-plugins-all', 'nagios-plugins-nrpe', 'nagios-common']
|
||||
/(?i-mx:centos|fedora|redhat)/ => ['net-snmp-utils',
|
||||
'nagios-plugins',
|
||||
'nagios-plugins-all',
|
||||
'nagios-plugins-nrpe',
|
||||
'nagios-common']
|
||||
}
|
||||
$reqpackages_nrpe = $::operatingsystem ? {
|
||||
/(?i-mx:centos|fedora|redhat)/ => ['nrpe']
|
||||
|
||||
@@ -11,6 +11,7 @@
|
||||
ScriptAlias /nagios/cgi-bin/ "/usr/lib64/nagios/cgi-bin/"
|
||||
|
||||
<Directory "/usr/lib64/nagios/cgi-bin/">
|
||||
SetEnv TZ "<%= @ng_use_timezone %>"
|
||||
<% if @ng_use_https == true -%>
|
||||
SSLRequireSSL
|
||||
<% else -%>
|
||||
@@ -51,7 +52,6 @@ ScriptAlias /nagios/cgi-bin/ "/usr/lib64/nagios/cgi-bin/"
|
||||
Alias /nagios "/usr/share/nagios/html"
|
||||
|
||||
<Directory "/usr/share/nagios/html">
|
||||
<% if @ng_use_https == true -%>
|
||||
SSLRequireSSL
|
||||
<% else -%>
|
||||
# SSLRequireSSL
|
||||
|
||||
@@ -88,774 +88,130 @@ auto_reschedule_checks=<%= @ng_auto_reschedule_checks %>
|
||||
auto_rescheduling_interval=<%= @ng_auto_reschedule_intval %>
|
||||
auto_rescheduling_window=<%= @ng_auto_reschedule_window %>
|
||||
|
||||
service_check_timeout=<%= @ng_service_check_timeout %>
|
||||
host_check_timeout=<%= @ng_host_check_timeout %>
|
||||
event_handler_timeout=<%= @ng_event_handler_timeout %>
|
||||
notification_timeout=<%= @ng_notification_timeout %>
|
||||
ocsp_timeout=<%= @ng_ocsp_timeout %>
|
||||
perfdata_timeout=<%= @ng_perfdata_timeout %>
|
||||
|
||||
retain_state_information=<%= @ng_retain_state_inf %>
|
||||
state_retention_file=<%= @ng_state_retention_file %>
|
||||
retention_update_interval=<%= @ng_retention_update_intval %>
|
||||
use_retained_program_state=<%= @ng_use_ret_program_state %>
|
||||
use_retained_scheduling_info=<%= @ng_use_ret_scheduling_info %>
|
||||
retained_host_attribute_mask=<%= @ng_ret_host_attr_mask %>
|
||||
retained_service_attribute_mask=<%= @ng_ret_service_attr_mask %>
|
||||
retained_process_host_attribute_mask=<%= ng_ret_proc_host_attr_mask %>
|
||||
retained_process_service_attribute_mask=<%= @ng_ret_proc_svc_attr_mask %>
|
||||
retained_contact_host_attribute_mask=<%= @ng_ret_contact_h_attr_mask %>
|
||||
retained_contact_service_attribute_mask=<%= @ng_ret_contact_s_attr_mask %>
|
||||
|
||||
interval_length=<%= @ng_interval_length %>
|
||||
check_for_updates=<%= @ng_check_for_updates %>
|
||||
bare_update_check=<%= @ng_bare_update_check %>
|
||||
|
||||
use_aggressive_host_checking=<%= @ng_use_aggr_host_checking %>
|
||||
execute_service_checks=<%= @ng_execute_service_checks %>
|
||||
accept_passive_service_checks=<%= @ng_accept_pass_svc_checks %>
|
||||
execute_host_checks=<%= @ng_execute_host_checks %>
|
||||
accept_passive_host_checks=<%= @ng_accept_pass_host_checks %>
|
||||
|
||||
enable_notifications=<%= @ng_enable_notifications %>
|
||||
enable_event_handlers=<%= ng_enable_event_handlers %>
|
||||
process_performance_data=<%= @ng_process_perf_data %>
|
||||
|
||||
<% if @ng_process_perf_data == '1' -%>
|
||||
host_perfdata_command=<%= @ng_host_perfdata_command %>
|
||||
service_perfdata_command=<%= @ng_svc_perfdata_command %>
|
||||
host_perfdata_file=<%= @ng_host_perfdata_file %>
|
||||
service_perfdata_file=<%= @ng_service_perfdata_file %>
|
||||
host_perfdata_file_template=<%= @ng_host_perfdata_template %>
|
||||
service_perfdata_file_template=ng_svc_perfdata_template
|
||||
host_perfdata_file_mode=<%= @ng_host_perfdata_file_mode %>
|
||||
service_perfdata_file_mode=<%= @ng_svc_perfdata_file_mode %>
|
||||
host_perfdata_file_processing_interval=<%= @ng_h_perfdata_proc_intval %>
|
||||
service_perfdata_file_processing_interval=<%= @ng_s_perfdata_proc_intval %>
|
||||
host_perfdata_file_processing_command=<%= @ng_h_perfdata_proc_cmd %>
|
||||
service_perfdata_file_processing_command=<%= @ng_s_perfdata_proc_cmd %>
|
||||
host_perfdata_process_empty_results=<%= @ng_h_perfdata_proc_e_res %>
|
||||
service_perfdata_process_empty_results=<%= @ng_s_perfdata_proc_e_res %>
|
||||
<% end -%>
|
||||
|
||||
obsess_over_services=<%= @ng_obsess_over_services %>
|
||||
<% if @ng_obsess_over_services == '1' -%>
|
||||
ocsp_command=<%= @ng_ocsp_command %>
|
||||
<% end -%>
|
||||
|
||||
obsess_over_hosts=<%= @ng_obsess_over_hosts %>
|
||||
<% if @ng_obsess_over_hosts == '1' -%>
|
||||
ochp_command=<%= @ng_ochp_command %>
|
||||
<% end -%>
|
||||
|
||||
translate_passive_host_checks=<%= @ng_translate_pass_h_checks %>
|
||||
|
||||
passive_host_checks_are_soft=<%= @ng_pass_h_checks_are_soft %>
|
||||
|
||||
check_for_orphaned_services=<%= @ng_check_orphaned_svc %>
|
||||
check_for_orphaned_hosts=<%= @ng_check_orphaned_hosts %>
|
||||
|
||||
check_service_freshness=<%= @ng_check_service_freshness %>
|
||||
<% if @ng_check_service_freshness == '1' -%>
|
||||
service_freshness_check_interval=<%= @ng_svc_fresh_check_intval %>
|
||||
<% end -%>
|
||||
|
||||
service_check_timeout_state=<%= @ng_svc_check_timeout_state %>
|
||||
|
||||
check_host_freshness=<%= @ng_check_host_freshness %>
|
||||
<% if @ng_check_host_freshness == '1' -%>
|
||||
host_freshness_check_interval=<%= @ng_host_fresh_check_intval %>
|
||||
<%= end -%>
|
||||
|
||||
additional_freshness_latency=<%= @ng_add_freshness_latency %>
|
||||
|
||||
enable_flap_detection=<%= @ng_enable_flap_detection %>
|
||||
<% if @ng_enable_flap_detection == '1' -%>
|
||||
low_service_flap_threshold=<%= @ng_low_svc_flap_threshold %>
|
||||
high_service_flap_threshold=<%= @ng_high_svc_flap_threshold %>
|
||||
low_host_flap_threshold=<%= @ng_low_h_flap_threshold %>
|
||||
high_host_flap_threshold=<%= @ng_high_h_flap_threshold %>
|
||||
|
||||
date_format=<%= @ng_date_format %>
|
||||
|
||||
<% if @ng_use_timezone_offset == true -%>
|
||||
use_timezone=<%= @ng_use_timezone %>
|
||||
<% end -%>
|
||||
|
||||
illegal_object_name_chars=<%= @ng_illegal_obj_name_chars %>
|
||||
illegal_macro_output_chars=<%= @ng_ill_macro_output_chars %>
|
||||
|
||||
use_regexp_matching=<%= @ng_use_regexp_matching %>
|
||||
use_true_regexp_matching=<%= @ng_true_regexp_matching %>
|
||||
|
||||
admin_email=<%= @ng_mail_user %>
|
||||
admin_pager=<%= @ng_page_user %>
|
||||
|
||||
daemon_dumps_core=<%= @ng_daemon_dumps_core %>
|
||||
|
||||
use_large_installation_tweaks=<%= @ng_use_large_inst_tweaks %>
|
||||
enable_environment_macros=<%= @ng_enable_env_macros %>
|
||||
|
||||
free_child_process_memory=<%= @ng_free_child_process_mem %>
|
||||
child_processes_fork_twice=<%= @ng_child_proc_fork_twice %>
|
||||
|
||||
debug_level=<%= @ng_debug_level %>
|
||||
debug_verbosity=<%= @ng_debug_verbosity %>
|
||||
debug_file=<%= @ng_debug_file %>
|
||||
max_debug_file_size=<%= @ng_max_debug_file_size %>
|
||||
|
||||
allow_empty_hostgroup_assignment=<%= @ng_allow_empty_hostgroups %>
|
||||
|
||||
<% unless @ng_check_workers.empty? %>
|
||||
check_workers=<%= @ng_check_workers %>
|
||||
<% end %>
|
||||
|
||||
# TIMEOUT VALUES
|
||||
# These options control how much time Nagios will allow various
|
||||
# types of commands to execute before killing them off. Options
|
||||
# are available for controlling maximum time allotted for
|
||||
# service checks, host checks, event handlers, notifications, the
|
||||
# ocsp command, and performance data commands. All values are in
|
||||
# seconds.
|
||||
|
||||
service_check_timeout=60
|
||||
host_check_timeout=30
|
||||
event_handler_timeout=30
|
||||
notification_timeout=30
|
||||
ocsp_timeout=5
|
||||
perfdata_timeout=5
|
||||
|
||||
|
||||
|
||||
# RETAIN STATE INFORMATION
|
||||
# This setting determines whether or not Nagios will save state
|
||||
# information for services and hosts before it shuts down. Upon
|
||||
# startup Nagios will reload all saved service and host state
|
||||
# information before starting to monitor. This is useful for
|
||||
# maintaining long-term data on state statistics, etc, but will
|
||||
# slow Nagios down a bit when it (re)starts. Since its only
|
||||
# a one-time penalty, I think its well worth the additional
|
||||
# startup delay.
|
||||
|
||||
retain_state_information=1
|
||||
|
||||
|
||||
|
||||
# STATE RETENTION FILE
|
||||
# This is the file that Nagios should use to store host and
|
||||
# service state information before it shuts down. The state
|
||||
# information in this file is also read immediately prior to
|
||||
# starting to monitor the network when Nagios is restarted.
|
||||
# This file is used only if the retain_state_information
|
||||
# variable is set to 1.
|
||||
|
||||
state_retention_file=/var/spool/nagios/retention.dat
|
||||
|
||||
|
||||
|
||||
# RETENTION DATA UPDATE INTERVAL
|
||||
# This setting determines how often (in minutes) that Nagios
|
||||
# will automatically save retention data during normal operation.
|
||||
# If you set this value to 0, Nagios will not save retention
|
||||
# data at regular interval, but it will still save retention
|
||||
# data before shutting down or restarting. If you have disabled
|
||||
# state retention, this option has no effect.
|
||||
|
||||
retention_update_interval=60
|
||||
|
||||
|
||||
|
||||
# USE RETAINED PROGRAM STATE
|
||||
# This setting determines whether or not Nagios will set
|
||||
# program status variables based on the values saved in the
|
||||
# retention file. If you want to use retained program status
|
||||
# information, set this value to 1. If not, set this value
|
||||
# to 0.
|
||||
|
||||
use_retained_program_state=1
|
||||
|
||||
|
||||
|
||||
# USE RETAINED SCHEDULING INFO
|
||||
# This setting determines whether or not Nagios will retain
|
||||
# the scheduling info (next check time) for hosts and services
|
||||
# based on the values saved in the retention file. If you
|
||||
# If you want to use retained scheduling info, set this
|
||||
# value to 1. If not, set this value to 0.
|
||||
|
||||
use_retained_scheduling_info=1
|
||||
|
||||
|
||||
|
||||
# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE)
|
||||
# The following variables are used to specify specific host and
|
||||
# service attributes that should *not* be retained by Nagios during
|
||||
# program restarts.
|
||||
#
|
||||
# The values of the masks are bitwise ANDs of values specified
|
||||
# by the "MODATTR_" definitions found in include/common.h.
|
||||
# For example, if you do not want the current enabled/disabled state
|
||||
# of flap detection and event handlers for hosts to be retained, you
|
||||
# would use a value of 24 for the host attribute mask...
|
||||
# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24
|
||||
|
||||
# This mask determines what host attributes are not retained
|
||||
retained_host_attribute_mask=0
|
||||
|
||||
# This mask determines what service attributes are not retained
|
||||
retained_service_attribute_mask=0
|
||||
|
||||
# These two masks determine what process attributes are not retained.
|
||||
# There are two masks, because some process attributes have host and service
|
||||
# options. For example, you can disable active host checks, but leave active
|
||||
# service checks enabled.
|
||||
retained_process_host_attribute_mask=0
|
||||
retained_process_service_attribute_mask=0
|
||||
|
||||
# These two masks determine what contact attributes are not retained.
|
||||
# There are two masks, because some contact attributes have host and
|
||||
# service options. For example, you can disable host notifications for
|
||||
# a contact, but leave service notifications enabled for them.
|
||||
retained_contact_host_attribute_mask=0
|
||||
retained_contact_service_attribute_mask=0
|
||||
|
||||
|
||||
|
||||
# INTERVAL LENGTH
|
||||
# This is the seconds per unit interval as used in the
|
||||
# host/contact/service configuration files. Setting this to 60 means
|
||||
# that each interval is one minute long (60 seconds). Other settings
|
||||
# have not been tested much, so your mileage is likely to vary...
|
||||
|
||||
interval_length=60
|
||||
|
||||
|
||||
|
||||
# CHECK FOR UPDATES
|
||||
# This option determines whether Nagios will automatically check to
|
||||
# see if new updates (releases) are available. It is recommend that you
|
||||
# enable this option to ensure that you stay on top of the latest critical
|
||||
# patches to Nagios. Nagios is critical to you - make sure you keep it in
|
||||
# good shape. Nagios will check once a day for new updates. Data collected
|
||||
# by Nagios Enterprises from the update check is processed in accordance
|
||||
# with our privacy policy - see https://api.nagios.org for details.
|
||||
|
||||
check_for_updates=1
|
||||
|
||||
|
||||
|
||||
# BARE UPDATE CHECK
|
||||
# This option determines what data Nagios will send to api.nagios.org when
|
||||
# it checks for updates. By default, Nagios will send information on the
|
||||
# current version of Nagios you have installed, as well as an indicator as
|
||||
# to whether this was a new installation or not. Nagios Enterprises uses
|
||||
# this data to determine the number of users running specific version of
|
||||
# Nagios. Enable this option if you do not want this information to be sent.
|
||||
|
||||
bare_update_check=0
|
||||
|
||||
|
||||
|
||||
# AGGRESSIVE HOST CHECKING OPTION
|
||||
# If you don't want to turn on aggressive host checking features, set
|
||||
# this value to 0 (the default). Otherwise set this value to 1 to
|
||||
# enable the aggressive check option. Read the docs for more info
|
||||
# on what aggressive host check is or check out the source code in
|
||||
# base/checks.c
|
||||
|
||||
use_aggressive_host_checking=0
|
||||
|
||||
|
||||
|
||||
# SERVICE CHECK EXECUTION OPTION
|
||||
# This determines whether or not Nagios will actively execute
|
||||
# service checks when it initially starts. If this option is
|
||||
# disabled, checks are not actively made, but Nagios can still
|
||||
# receive and process passive check results that come in. Unless
|
||||
# you're implementing redundant hosts or have a special need for
|
||||
# disabling the execution of service checks, leave this enabled!
|
||||
# Values: 1 = enable checks, 0 = disable checks
|
||||
|
||||
execute_service_checks=1
|
||||
|
||||
|
||||
|
||||
# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
|
||||
# This determines whether or not Nagios will accept passive
|
||||
# service checks results when it initially (re)starts.
|
||||
# Values: 1 = accept passive checks, 0 = reject passive checks
|
||||
|
||||
accept_passive_service_checks=1
|
||||
|
||||
|
||||
|
||||
# HOST CHECK EXECUTION OPTION
|
||||
# This determines whether or not Nagios will actively execute
|
||||
# host checks when it initially starts. If this option is
|
||||
# disabled, checks are not actively made, but Nagios can still
|
||||
# receive and process passive check results that come in. Unless
|
||||
# you're implementing redundant hosts or have a special need for
|
||||
# disabling the execution of host checks, leave this enabled!
|
||||
# Values: 1 = enable checks, 0 = disable checks
|
||||
|
||||
execute_host_checks=1
|
||||
|
||||
|
||||
|
||||
# PASSIVE HOST CHECK ACCEPTANCE OPTION
|
||||
# This determines whether or not Nagios will accept passive
|
||||
# host checks results when it initially (re)starts.
|
||||
# Values: 1 = accept passive checks, 0 = reject passive checks
|
||||
|
||||
accept_passive_host_checks=1
|
||||
|
||||
|
||||
|
||||
# NOTIFICATIONS OPTION
|
||||
# This determines whether or not Nagios will sent out any host or
|
||||
# service notifications when it is initially (re)started.
|
||||
# Values: 1 = enable notifications, 0 = disable notifications
|
||||
|
||||
enable_notifications=1
|
||||
|
||||
|
||||
|
||||
# EVENT HANDLER USE OPTION
|
||||
# This determines whether or not Nagios will run any host or
|
||||
# service event handlers when it is initially (re)started. Unless
|
||||
# you're implementing redundant hosts, leave this option enabled.
|
||||
# Values: 1 = enable event handlers, 0 = disable event handlers
|
||||
|
||||
enable_event_handlers=1
|
||||
|
||||
|
||||
|
||||
# PROCESS PERFORMANCE DATA OPTION
|
||||
# This determines whether or not Nagios will process performance
|
||||
# data returned from service and host checks. If this option is
|
||||
# enabled, host performance data will be processed using the
|
||||
# host_perfdata_command (defined below) and service performance
|
||||
# data will be processed using the service_perfdata_command (also
|
||||
# defined below). Read the HTML docs for more information on
|
||||
# performance data.
|
||||
# Values: 1 = process performance data, 0 = do not process performance data
|
||||
|
||||
process_performance_data=0
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
|
||||
# These commands are run after every host and service check is
|
||||
# performed. These commands are executed only if the
|
||||
# enable_performance_data option (above) is set to 1. The command
|
||||
# argument is the short name of a command definition that you
|
||||
# define in your host configuration file. Read the HTML docs for
|
||||
# more information on performance data.
|
||||
|
||||
#host_perfdata_command=process-host-perfdata
|
||||
#service_perfdata_command=process-service-perfdata
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA FILES
|
||||
# These files are used to store host and service performance data.
|
||||
# Performance data is only written to these files if the
|
||||
# enable_performance_data option (above) is set to 1.
|
||||
|
||||
#host_perfdata_file=/var/spool/nagios/host-perfdata
|
||||
#service_perfdata_file=/var/spool/nagios/service-perfdata
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
|
||||
# These options determine what data is written (and how) to the
|
||||
# performance data files. The templates may contain macros, special
|
||||
# characters (\t for tab, \r for carriage return, \n for newline)
|
||||
# and plain text. A newline is automatically added after each write
|
||||
# to the performance data file. Some examples of what you can do are
|
||||
# shown below.
|
||||
|
||||
#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
|
||||
#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA FILE MODES
|
||||
# This option determines whether or not the host and service
|
||||
# performance data files are opened in write ("w") or append ("a")
|
||||
# mode. If you want to use named pipes, you should use the special
|
||||
# pipe ("p") mode which avoid blocking at startup, otherwise you will
|
||||
# likely want the default append ("a") mode.
|
||||
|
||||
#host_perfdata_file_mode=a
|
||||
#service_perfdata_file_mode=a
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
|
||||
# These options determine how often (in seconds) the host and service
|
||||
# performance data files are processed using the commands defined
|
||||
# below. A value of 0 indicates the files should not be periodically
|
||||
# processed.
|
||||
|
||||
#host_perfdata_file_processing_interval=0
|
||||
#service_perfdata_file_processing_interval=0
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
|
||||
# These commands are used to periodically process the host and
|
||||
# service performance data files. The interval at which the
|
||||
# processing occurs is determined by the options above.
|
||||
|
||||
#host_perfdata_file_processing_command=process-host-perfdata-file
|
||||
#service_perfdata_file_processing_command=process-service-perfdata-file
|
||||
|
||||
|
||||
|
||||
# HOST AND SERVICE PERFORMANCE DATA PROCESS EMPTY RESULTS
|
||||
# These options determine wether the core will process empty perfdata
|
||||
# results or not. This is needed for distributed monitoring, and intentionally
|
||||
# turned on by default.
|
||||
# If you don't require empty perfdata - saving some cpu cycles
|
||||
# on unwanted macro calculation - you can turn that off. Be careful!
|
||||
# Values: 1 = enable, 0 = disable
|
||||
|
||||
#host_perfdata_process_empty_results=1
|
||||
#service_perfdata_process_empty_results=1
|
||||
|
||||
|
||||
# OBSESS OVER SERVICE CHECKS OPTION
|
||||
# This determines whether or not Nagios will obsess over service
|
||||
# checks and run the ocsp_command defined below. Unless you're
|
||||
# planning on implementing distributed monitoring, do not enable
|
||||
# this option. Read the HTML docs for more information on
|
||||
# implementing distributed monitoring.
|
||||
# Values: 1 = obsess over services, 0 = do not obsess (default)
|
||||
|
||||
obsess_over_services=0
|
||||
|
||||
|
||||
|
||||
# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
|
||||
# This is the command that is run for every service check that is
|
||||
# processed by Nagios. This command is executed only if the
|
||||
# obsess_over_services option (above) is set to 1. The command
|
||||
# argument is the short name of a command definition that you
|
||||
# define in your host configuration file. Read the HTML docs for
|
||||
# more information on implementing distributed monitoring.
|
||||
|
||||
#ocsp_command=somecommand
|
||||
|
||||
|
||||
|
||||
# OBSESS OVER HOST CHECKS OPTION
|
||||
# This determines whether or not Nagios will obsess over host
|
||||
# checks and run the ochp_command defined below. Unless you're
|
||||
# planning on implementing distributed monitoring, do not enable
|
||||
# this option. Read the HTML docs for more information on
|
||||
# implementing distributed monitoring.
|
||||
# Values: 1 = obsess over hosts, 0 = do not obsess (default)
|
||||
|
||||
obsess_over_hosts=0
|
||||
|
||||
|
||||
|
||||
# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND
|
||||
# This is the command that is run for every host check that is
|
||||
# processed by Nagios. This command is executed only if the
|
||||
# obsess_over_hosts option (above) is set to 1. The command
|
||||
# argument is the short name of a command definition that you
|
||||
# define in your host configuration file. Read the HTML docs for
|
||||
# more information on implementing distributed monitoring.
|
||||
|
||||
#ochp_command=somecommand
|
||||
|
||||
|
||||
|
||||
# TRANSLATE PASSIVE HOST CHECKS OPTION
|
||||
# This determines whether or not Nagios will translate
|
||||
# DOWN/UNREACHABLE passive host check results into their proper
|
||||
# state for this instance of Nagios. This option is useful
|
||||
# if you have distributed or failover monitoring setup. In
|
||||
# these cases your other Nagios servers probably have a different
|
||||
# "view" of the network, with regards to the parent/child relationship
|
||||
# of hosts. If a distributed monitoring server thinks a host
|
||||
# is DOWN, it may actually be UNREACHABLE from the point of
|
||||
# this Nagios instance. Enabling this option will tell Nagios
|
||||
# to translate any DOWN or UNREACHABLE host states it receives
|
||||
# passively into the correct state from the view of this server.
|
||||
# Values: 1 = perform translation, 0 = do not translate (default)
|
||||
|
||||
translate_passive_host_checks=0
|
||||
|
||||
|
||||
|
||||
# PASSIVE HOST CHECKS ARE SOFT OPTION
|
||||
# This determines whether or not Nagios will treat passive host
|
||||
# checks as being HARD or SOFT. By default, a passive host check
|
||||
# result will put a host into a HARD state type. This can be changed
|
||||
# by enabling this option.
|
||||
# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT
|
||||
|
||||
passive_host_checks_are_soft=0
|
||||
|
||||
|
||||
|
||||
# ORPHANED HOST/SERVICE CHECK OPTIONS
|
||||
# These options determine whether or not Nagios will periodically
|
||||
# check for orphaned host service checks. Since service checks are
|
||||
# not rescheduled until the results of their previous execution
|
||||
# instance are processed, there exists a possibility that some
|
||||
# checks may never get rescheduled. A similar situation exists for
|
||||
# host checks, although the exact scheduling details differ a bit
|
||||
# from service checks. Orphaned checks seem to be a rare
|
||||
# problem and should not happen under normal circumstances.
|
||||
# If you have problems with service checks never getting
|
||||
# rescheduled, make sure you have orphaned service checks enabled.
|
||||
# Values: 1 = enable checks, 0 = disable checks
|
||||
|
||||
check_for_orphaned_services=1
|
||||
check_for_orphaned_hosts=1
|
||||
|
||||
|
||||
|
||||
# SERVICE FRESHNESS CHECK OPTION
|
||||
# This option determines whether or not Nagios will periodically
|
||||
# check the "freshness" of service results. Enabling this option
|
||||
# is useful for ensuring passive checks are received in a timely
|
||||
# manner.
|
||||
# Values: 1 = enabled freshness checking, 0 = disable freshness checking
|
||||
|
||||
check_service_freshness=1
|
||||
|
||||
|
||||
|
||||
# SERVICE FRESHNESS CHECK INTERVAL
|
||||
# This setting determines how often (in seconds) Nagios will
|
||||
# check the "freshness" of service check results. If you have
|
||||
# disabled service freshness checking, this option has no effect.
|
||||
|
||||
service_freshness_check_interval=60
|
||||
|
||||
|
||||
|
||||
# SERVICE CHECK TIMEOUT STATE
|
||||
# This setting determines the state Nagios will report when a
|
||||
# service check times out - that is does not respond within
|
||||
# service_check_timeout seconds. This can be useful if a
|
||||
# machine is running at too high a load and you do not want
|
||||
# to consider a failed service check to be critical (the default).
|
||||
# Valid settings are:
|
||||
# c - Critical (default)
|
||||
# u - Unknown
|
||||
# w - Warning
|
||||
# o - OK
|
||||
|
||||
service_check_timeout_state=c
|
||||
|
||||
|
||||
|
||||
# HOST FRESHNESS CHECK OPTION
|
||||
# This option determines whether or not Nagios will periodically
|
||||
# check the "freshness" of host results. Enabling this option
|
||||
# is useful for ensuring passive checks are received in a timely
|
||||
# manner.
|
||||
# Values: 1 = enabled freshness checking, 0 = disable freshness checking
|
||||
|
||||
check_host_freshness=0
|
||||
|
||||
|
||||
|
||||
# HOST FRESHNESS CHECK INTERVAL
|
||||
# This setting determines how often (in seconds) Nagios will
|
||||
# check the "freshness" of host check results. If you have
|
||||
# disabled host freshness checking, this option has no effect.
|
||||
|
||||
host_freshness_check_interval=60
|
||||
|
||||
|
||||
|
||||
|
||||
# ADDITIONAL FRESHNESS THRESHOLD LATENCY
|
||||
# This setting determines the number of seconds that Nagios
|
||||
# will add to any host and service freshness thresholds that
|
||||
# it calculates (those not explicitly specified by the user).
|
||||
|
||||
additional_freshness_latency=15
|
||||
|
||||
|
||||
|
||||
|
||||
# FLAP DETECTION OPTION
|
||||
# This option determines whether or not Nagios will try
|
||||
# and detect hosts and services that are "flapping".
|
||||
# Flapping occurs when a host or service changes between
|
||||
# states too frequently. When Nagios detects that a
|
||||
# host or service is flapping, it will temporarily suppress
|
||||
# notifications for that host/service until it stops
|
||||
# flapping. Flap detection is very experimental, so read
|
||||
# the HTML documentation before enabling this feature!
|
||||
# Values: 1 = enable flap detection
|
||||
# 0 = disable flap detection (default)
|
||||
|
||||
enable_flap_detection=1
|
||||
|
||||
|
||||
|
||||
# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
|
||||
# Read the HTML documentation on flap detection for
|
||||
# an explanation of what this option does. This option
|
||||
# has no effect if flap detection is disabled.
|
||||
|
||||
low_service_flap_threshold=5.0
|
||||
high_service_flap_threshold=20.0
|
||||
low_host_flap_threshold=5.0
|
||||
high_host_flap_threshold=20.0
|
||||
|
||||
|
||||
|
||||
# DATE FORMAT OPTION
|
||||
# This option determines how short dates are displayed. Valid options
|
||||
# include:
|
||||
# us (MM-DD-YYYY HH:MM:SS)
|
||||
# euro (DD-MM-YYYY HH:MM:SS)
|
||||
# iso8601 (YYYY-MM-DD HH:MM:SS)
|
||||
# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
|
||||
#
|
||||
|
||||
date_format=us
|
||||
|
||||
|
||||
|
||||
|
||||
# TIMEZONE OFFSET
|
||||
# This option is used to override the default timezone that this
|
||||
# instance of Nagios runs in. If not specified, Nagios will use
|
||||
# the system configured timezone.
|
||||
#
|
||||
# NOTE: In order to display the correct timezone in the CGIs, you
|
||||
# will also need to alter the Apache directives for the CGI path
|
||||
# to include your timezone. Example:
|
||||
#
|
||||
# <Directory "/usr/local/nagios/sbin/">
|
||||
# SetEnv TZ "Australia/Brisbane"
|
||||
# ...
|
||||
# </Directory>
|
||||
|
||||
#use_timezone=US/Mountain
|
||||
#use_timezone=Australia/Brisbane
|
||||
|
||||
|
||||
|
||||
# ILLEGAL OBJECT NAME CHARACTERS
|
||||
# This option allows you to specify illegal characters that cannot
|
||||
# be used in host names, service descriptions, or names of other
|
||||
# object types.
|
||||
|
||||
illegal_object_name_chars=`~!$%^&*|'"<>?,()=
|
||||
|
||||
|
||||
|
||||
# ILLEGAL MACRO OUTPUT CHARACTERS
|
||||
# This option allows you to specify illegal characters that are
|
||||
# stripped from macros before being used in notifications, event
|
||||
# handlers, etc. This DOES NOT affect macros used in service or
|
||||
# host check commands.
|
||||
# The following macros are stripped of the characters you specify:
|
||||
# $HOSTOUTPUT$
|
||||
# $LONGHOSTOUTPUT$
|
||||
# $HOSTPERFDATA$
|
||||
# $HOSTACKAUTHOR$
|
||||
# $HOSTACKCOMMENT$
|
||||
# $SERVICEOUTPUT$
|
||||
# $LONGSERVICEOUTPUT$
|
||||
# $SERVICEPERFDATA$
|
||||
# $SERVICEACKAUTHOR$
|
||||
# $SERVICEACKCOMMENT$
|
||||
|
||||
illegal_macro_output_chars=`~$&|'"<>
|
||||
|
||||
|
||||
|
||||
# REGULAR EXPRESSION MATCHING
|
||||
# This option controls whether or not regular expression matching
|
||||
# takes place in the object config files. Regular expression
|
||||
# matching is used to match host, hostgroup, service, and service
|
||||
# group names/descriptions in some fields of various object types.
|
||||
# Values: 1 = enable regexp matching, 0 = disable regexp matching
|
||||
|
||||
use_regexp_matching=0
|
||||
|
||||
|
||||
|
||||
# "TRUE" REGULAR EXPRESSION MATCHING
|
||||
# This option controls whether or not "true" regular expression
|
||||
# matching takes place in the object config files. This option
|
||||
# only has an effect if regular expression matching is enabled
|
||||
# (see above). If this option is DISABLED, regular expression
|
||||
# matching only occurs if a string contains wildcard characters
|
||||
# (* and ?). If the option is ENABLED, regexp matching occurs
|
||||
# all the time (which can be annoying).
|
||||
# Values: 1 = enable true matching, 0 = disable true matching
|
||||
|
||||
use_true_regexp_matching=0
|
||||
|
||||
|
||||
|
||||
# ADMINISTRATOR EMAIL/PAGER ADDRESSES
|
||||
# The email and pager address of a global administrator (likely you).
|
||||
# Nagios never uses these values itself, but you can access them by
|
||||
# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification
|
||||
# commands.
|
||||
|
||||
admin_email=nagios@localhost
|
||||
admin_pager=pagenagios@localhost
|
||||
|
||||
|
||||
|
||||
# DAEMON CORE DUMP OPTION
|
||||
# This option determines whether or not Nagios is allowed to create
|
||||
# a core dump when it runs as a daemon. Note that it is generally
|
||||
# considered bad form to allow this, but it may be useful for
|
||||
# debugging purposes. Enabling this option doesn't guarantee that
|
||||
# a core file will be produced, but that's just life...
|
||||
# Values: 1 - Allow core dumps
|
||||
# 0 - Do not allow core dumps (default)
|
||||
|
||||
daemon_dumps_core=0
|
||||
|
||||
|
||||
|
||||
# LARGE INSTALLATION TWEAKS OPTION
|
||||
# This option determines whether or not Nagios will take some shortcuts
|
||||
# which can save on memory and CPU usage in large Nagios installations.
|
||||
# Read the documentation for more information on the benefits/tradeoffs
|
||||
# of enabling this option.
|
||||
# Values: 1 - Enabled tweaks
|
||||
# 0 - Disable tweaks (default)
|
||||
|
||||
use_large_installation_tweaks=0
|
||||
|
||||
|
||||
|
||||
# ENABLE ENVIRONMENT MACROS
|
||||
# This option determines whether or not Nagios will make all standard
|
||||
# macros available as environment variables when host/service checks
|
||||
# and system commands (event handlers, notifications, etc.) are
|
||||
# executed.
|
||||
# Enabling this is a very bad idea for anything but very small setups,
|
||||
# as it means plugins, notification scripts and eventhandlers may run
|
||||
# out of environment space. It will also cause a significant increase
|
||||
# in CPU- and memory usage and drastically reduce the number of checks
|
||||
# you can run.
|
||||
# Values: 1 - Enable environment variable macros
|
||||
# 0 - Disable environment variable macros (default)
|
||||
|
||||
enable_environment_macros=0
|
||||
|
||||
|
||||
|
||||
# CHILD PROCESS MEMORY OPTION
|
||||
# This option determines whether or not Nagios will free memory in
|
||||
# child processes (processed used to execute system commands and host/
|
||||
# service checks). If you specify a value here, it will override
|
||||
# program defaults.
|
||||
# Value: 1 - Free memory in child processes
|
||||
# 0 - Do not free memory in child processes
|
||||
|
||||
#free_child_process_memory=1
|
||||
|
||||
|
||||
|
||||
# CHILD PROCESS FORKING BEHAVIOR
|
||||
# This option determines how Nagios will fork child processes
|
||||
# (used to execute system commands and host/service checks). Normally
|
||||
# child processes are fork()ed twice, which provides a very high level
|
||||
# of isolation from problems. Fork()ing once is probably enough and will
|
||||
# save a great deal on CPU usage (in large installs), so you might
|
||||
# want to consider using this. If you specify a value here, it will
|
||||
# program defaults.
|
||||
# Value: 1 - Child processes fork() twice
|
||||
# 0 - Child processes fork() just once
|
||||
|
||||
#child_processes_fork_twice=1
|
||||
|
||||
|
||||
|
||||
# DEBUG LEVEL
|
||||
# This option determines how much (if any) debugging information will
|
||||
# be written to the debug file. OR values together to log multiple
|
||||
# types of information.
|
||||
# Values:
|
||||
# -1 = Everything
|
||||
# 0 = Nothing
|
||||
# 1 = Functions
|
||||
# 2 = Configuration
|
||||
# 4 = Process information
|
||||
# 8 = Scheduled events
|
||||
# 16 = Host/service checks
|
||||
# 32 = Notifications
|
||||
# 64 = Event broker
|
||||
# 128 = External commands
|
||||
# 256 = Commands
|
||||
# 512 = Scheduled downtime
|
||||
# 1024 = Comments
|
||||
# 2048 = Macros
|
||||
|
||||
debug_level=0
|
||||
|
||||
|
||||
|
||||
# DEBUG VERBOSITY
|
||||
# This option determines how verbose the debug log out will be.
|
||||
# Values: 0 = Brief output
|
||||
# 1 = More detailed
|
||||
# 2 = Very detailed
|
||||
|
||||
debug_verbosity=1
|
||||
|
||||
|
||||
|
||||
# DEBUG FILE
|
||||
# This option determines where Nagios should write debugging information.
|
||||
|
||||
debug_file=/var/spool/nagios/nagios.debug
|
||||
|
||||
|
||||
|
||||
# MAX DEBUG FILE SIZE
|
||||
# This option determines the maximum size (in bytes) of the debug file. If
|
||||
# the file grows larger than this size, it will be renamed with a .old
|
||||
# extension. If a file already exists with a .old extension it will
|
||||
# automatically be deleted. This helps ensure your disk space usage doesn't
|
||||
# get out of control when debugging Nagios.
|
||||
|
||||
max_debug_file_size=1000000
|
||||
|
||||
|
||||
|
||||
# Should we allow hostgroups to have no hosts, we default this to off since
|
||||
# that was the old behavior
|
||||
|
||||
allow_empty_hostgroup_assignment=0
|
||||
|
||||
|
||||
|
||||
# Normally worker count is dynamically allocated based on 1.5 * number of cpu's
|
||||
# with a minimum of 4 workers. This value will override the defaults
|
||||
|
||||
#check_workers=3
|
||||
|
||||
|
||||
|
||||
# DISABLE SERVICE CHECKS WHEN HOST DOWN
|
||||
# This option will disable all service checks if the host is not in an UP state
|
||||
#
|
||||
# While desirable in some environments, enabling this value can distort report
|
||||
# values as the expected quantity of checks will not have been performed
|
||||
|
||||
#host_down_disable_service_checks=0
|
||||
|
||||
|
||||
|
||||
# EXPERIMENTAL load controlling options
|
||||
# To get current defaults based on your system issue a command to
|
||||
# the query handler. Please note that this is an experimental feature
|
||||
# and not meant for production use. Used incorrectly it can induce
|
||||
# enormous latency.
|
||||
# #core loadctl
|
||||
# jobs_max - The maximum amount of jobs to run at one time
|
||||
# jobs_min - The minimum amount of jobs to run at one time
|
||||
# jobs_limit - The maximum amount of jobs the current load lets us run
|
||||
# backoff_limit - The minimum backoff_change
|
||||
# backoff_change - # of jobs to remove from jobs_limit when backing off
|
||||
# rampup_limit - Minimum rampup_change
|
||||
# rampup_change - # of jobs to add to jobs_limit when ramping up
|
||||
# NOTE: The backoff_limit and rampup_limit are NOT used by anything currently,
|
||||
# so if your system is under load nothing will actively modify the jobs
|
||||
# even if you have these options enabled, they are for external
|
||||
# connector information only. However, if you change the jobs_max or
|
||||
# jobs_min manually here or through the query handler interface that
|
||||
# WILL affect your system
|
||||
#loadctl_options=jobs_max=100;backoff_limit=10;rampup_change=5
|
||||
host_down_disable_service_checks=<%= @ng_host_down_svc_checks %>
|
||||
|
||||
<% if @ng_enable_load_ctl_options == true -%>
|
||||
loadctl_options=<%= @ng_loadctl_options %>
|
||||
<% end -%>
|
||||
|
||||
Reference in New Issue
Block a user