OP#436 more controls
This commit is contained in:
@@ -249,6 +249,44 @@
|
||||
# host performance data in Nagios. Default is '0'.
|
||||
# @param [String] ng_s_perfdata_proc_e_result The expected result for processing
|
||||
# service performance data in Nagios. Default is '0'.
|
||||
# @param [String] ng_obsess_over_services Whether to enable obsessing over
|
||||
# services in Nagios. Default is '0'.
|
||||
# @param [String] ng_ocsp_command The command to run for obsessive compulsive
|
||||
# service processing in Nagios. Default is 'somecommand'.
|
||||
# @param [String] ng_obsess_over_hosts Whether to enable obsessing over
|
||||
# hosts in Nagios. Default is '0'.
|
||||
# @param [String] ng_ochp_command The command to run for obsessive compulsive
|
||||
# host processing in Nagios. Default is 'somecommand'.
|
||||
# @param [String] ng_translate_pass_h_checks Whether to translate passive host
|
||||
# checks in Nagios. Default is '0'.
|
||||
# @param [String] ng_pass_h_checks_are_soft Whether to treat passive host
|
||||
# checks as soft in Nagios. Default is '0'.
|
||||
# @param [String] ng_check_orphaned_svc Whether to check for orphaned service
|
||||
# checks in Nagios. Default is '1'.
|
||||
# @param [String] ng_check_orphaned_hosts Whether to check for orphaned host
|
||||
# checks in Nagios. Default is '1'.
|
||||
# @param [String] ng_check_service_freshness Whether to check for service
|
||||
# freshness in Nagios. Default is '1'.
|
||||
# @param [String] ng_svc_fresh_check_intval The interval for checking service
|
||||
# freshness in Nagios. Default is '60'.
|
||||
# @param [String] ng_svc_check_timeout_state The state to set a service to when
|
||||
# it times out in Nagios. Default is 'c'.
|
||||
# @param [String] ng_check_host_freshness Whether to check for host freshness in
|
||||
# Nagios. Default is '1'.
|
||||
# @param [String] ng_host_fresh_check_intval The interval for checking host
|
||||
# freshness in Nagios. Default is '60'.
|
||||
# @param [String] ng_add_freshness_latency The additional latency threshold for
|
||||
# freshness checks in Nagios. Default is '15'.
|
||||
# @param [String] ng_enable_flap_detection Whether to enable flap detection in
|
||||
# Nagios. Default is '1'.
|
||||
# @param [String] ng_low_svc_flap_threshold The low service flap threshold for
|
||||
# Nagios. Default is '5.0'.
|
||||
# @param [String] ng_high_svc_flap_threshold The high service flap threshold for
|
||||
# Nagios. Default is '20.0'.
|
||||
# @param [String] ng_low_h_flap_threshold The low host flap threshold for
|
||||
# Nagios. Default is '5.0'.
|
||||
# @param [String] ng_high_h_flap_threshold The high host flap threshold for
|
||||
# Nagios. Default is '20.0'.
|
||||
################################################################################
|
||||
class confdroid_nagios::params (
|
||||
|
||||
@@ -357,6 +395,25 @@ class confdroid_nagios::params (
|
||||
String $ng_s_perfdata_proc_cmd = 'process-service-perfdata',
|
||||
String $ng_h_perfdata_proc_e_result = '0',
|
||||
String $ng_s_perfdata_proc_e_result = '0',
|
||||
String $ng_obsess_over_services = '0',
|
||||
String $ng_ocsp_command = 'somecommand',
|
||||
String $ng_obsess_over_hosts = '0',
|
||||
String $ng_ochp_command = 'somecommand',
|
||||
String $ng_translate_pass_h_checks = '0',
|
||||
String $ng_pass_h_checks_are_soft = '0',
|
||||
String $ng_check_orphaned_svc = '1',
|
||||
String $ng_check_orphaned_hosts = '1',
|
||||
String $ng_check_service_freshness = '1',
|
||||
String $ng_svc_fresh_check_intval = '60',
|
||||
String $ng_svc_check_timeout_state = 'c',
|
||||
String $ng_check_host_freshness = '1',
|
||||
String $ng_host_fresh_check_intval = '60',
|
||||
String $ng_add_freshness_latency = '15',
|
||||
String $ng_enable_flap_detection = '1',
|
||||
String $ng_low_svc_flap_threshold = '5.0',
|
||||
String $ng_high_svc_flap_threshold = '20.0',
|
||||
String $ng_low_h_flap_threshold = '5.0',
|
||||
String $ng_high_h_flap_threshold = '20.0',
|
||||
|
||||
# cgi.cfg
|
||||
String $ng_context_help = '1',
|
||||
|
||||
@@ -151,194 +151,44 @@ host_perfdata_process_empty_results=<%= @ng_h_perfdata_proc_e_res %>
|
||||
service_perfdata_process_empty_results=<%= @ng_s_perfdata_proc_e_res %>
|
||||
<% end -%>
|
||||
|
||||
# OBSESS OVER SERVICE CHECKS OPTION
|
||||
# This determines whether or not Nagios will obsess over service
|
||||
# checks and run the ocsp_command defined below. Unless you're
|
||||
# planning on implementing distributed monitoring, do not enable
|
||||
# this option. Read the HTML docs for more information on
|
||||
# implementing distributed monitoring.
|
||||
# Values: 1 = obsess over services, 0 = do not obsess (default)
|
||||
obsess_over_services=<%= @ng_obsess_over_services %>
|
||||
<% if @ng_obsess_over_services == '1' -%>
|
||||
ocsp_command=<%= @ng_ocsp_command %>
|
||||
<% end -%>
|
||||
|
||||
obsess_over_services=0
|
||||
obsess_over_hosts=<%= @ng_obsess_over_hosts %>
|
||||
<% if @ng_obsess_over_hosts == '1' -%>
|
||||
ochp_command=<%= @ng_ochp_command %>
|
||||
<% end -%>
|
||||
|
||||
translate_passive_host_checks=<%= @ng_translate_pass_h_checks %>
|
||||
passive_host_checks_are_soft=<%= @ng_pass_h_checks_are_soft %>
|
||||
|
||||
check_for_orphaned_services=<%= @ng_check_orphaned_svc %>
|
||||
check_for_orphaned_hosts=<%= @ng_check_orphaned_hosts %>
|
||||
|
||||
check_service_freshness=<%= @ng_check_service_freshness %>
|
||||
<% if @ng_check_service_freshness == '1' -%>
|
||||
service_freshness_check_interval=<%= @ng_svc_fresh_check_intval %>
|
||||
<% end -%>
|
||||
service_check_timeout_state=<%= @ng_svc_check_timeout_state %>
|
||||
|
||||
check_host_freshness=<%= @ng_check_host_freshness %>
|
||||
<% if @ng_check_host_freshness == '1' -%>
|
||||
host_freshness_check_interval=<%= @ng_host_fresh_check_intval %>
|
||||
<% end -%>
|
||||
additional_freshness_latency=<%= @ng_add_freshness_latency %>
|
||||
|
||||
enable_flap_detection=<%= @ng_enable_flap_detection %>
|
||||
<% if @ng_enable_flap_detection == '1' -%>
|
||||
low_service_flap_threshold=<%= @ng_low_svc_flap_threshold %>
|
||||
high_service_flap_threshold=<%= @ng_high_svc_flap_threshold %>
|
||||
low_host_flap_threshold=<%= @ng_low_h_flap_threshold %>
|
||||
high_host_flap_threshold=<%= @ng_high_h_flap_threshold %>
|
||||
<% end -%>
|
||||
|
||||
|
||||
|
||||
# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
|
||||
# This is the command that is run for every service check that is
|
||||
# processed by Nagios. This command is executed only if the
|
||||
# obsess_over_services option (above) is set to 1. The command
|
||||
# argument is the short name of a command definition that you
|
||||
# define in your host configuration file. Read the HTML docs for
|
||||
# more information on implementing distributed monitoring.
|
||||
|
||||
#ocsp_command=somecommand
|
||||
|
||||
|
||||
|
||||
# OBSESS OVER HOST CHECKS OPTION
|
||||
# This determines whether or not Nagios will obsess over host
|
||||
# checks and run the ochp_command defined below. Unless you're
|
||||
# planning on implementing distributed monitoring, do not enable
|
||||
# this option. Read the HTML docs for more information on
|
||||
# implementing distributed monitoring.
|
||||
# Values: 1 = obsess over hosts, 0 = do not obsess (default)
|
||||
|
||||
obsess_over_hosts=0
|
||||
|
||||
|
||||
|
||||
# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND
|
||||
# This is the command that is run for every host check that is
|
||||
# processed by Nagios. This command is executed only if the
|
||||
# obsess_over_hosts option (above) is set to 1. The command
|
||||
# argument is the short name of a command definition that you
|
||||
# define in your host configuration file. Read the HTML docs for
|
||||
# more information on implementing distributed monitoring.
|
||||
|
||||
#ochp_command=somecommand
|
||||
|
||||
|
||||
|
||||
# TRANSLATE PASSIVE HOST CHECKS OPTION
|
||||
# This determines whether or not Nagios will translate
|
||||
# DOWN/UNREACHABLE passive host check results into their proper
|
||||
# state for this instance of Nagios. This option is useful
|
||||
# if you have distributed or failover monitoring setup. In
|
||||
# these cases your other Nagios servers probably have a different
|
||||
# "view" of the network, with regards to the parent/child relationship
|
||||
# of hosts. If a distributed monitoring server thinks a host
|
||||
# is DOWN, it may actually be UNREACHABLE from the point of
|
||||
# this Nagios instance. Enabling this option will tell Nagios
|
||||
# to translate any DOWN or UNREACHABLE host states it receives
|
||||
# passively into the correct state from the view of this server.
|
||||
# Values: 1 = perform translation, 0 = do not translate (default)
|
||||
|
||||
translate_passive_host_checks=0
|
||||
|
||||
|
||||
|
||||
# PASSIVE HOST CHECKS ARE SOFT OPTION
|
||||
# This determines whether or not Nagios will treat passive host
|
||||
# checks as being HARD or SOFT. By default, a passive host check
|
||||
# result will put a host into a HARD state type. This can be changed
|
||||
# by enabling this option.
|
||||
# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT
|
||||
|
||||
passive_host_checks_are_soft=0
|
||||
|
||||
|
||||
|
||||
# ORPHANED HOST/SERVICE CHECK OPTIONS
|
||||
# These options determine whether or not Nagios will periodically
|
||||
# check for orphaned host service checks. Since service checks are
|
||||
# not rescheduled until the results of their previous execution
|
||||
# instance are processed, there exists a possibility that some
|
||||
# checks may never get rescheduled. A similar situation exists for
|
||||
# host checks, although the exact scheduling details differ a bit
|
||||
# from service checks. Orphaned checks seem to be a rare
|
||||
# problem and should not happen under normal circumstances.
|
||||
# If you have problems with service checks never getting
|
||||
# rescheduled, make sure you have orphaned service checks enabled.
|
||||
# Values: 1 = enable checks, 0 = disable checks
|
||||
|
||||
check_for_orphaned_services=1
|
||||
check_for_orphaned_hosts=1
|
||||
|
||||
|
||||
|
||||
# SERVICE FRESHNESS CHECK OPTION
|
||||
# This option determines whether or not Nagios will periodically
|
||||
# check the "freshness" of service results. Enabling this option
|
||||
# is useful for ensuring passive checks are received in a timely
|
||||
# manner.
|
||||
# Values: 1 = enabled freshness checking, 0 = disable freshness checking
|
||||
|
||||
check_service_freshness=1
|
||||
|
||||
|
||||
|
||||
# SERVICE FRESHNESS CHECK INTERVAL
|
||||
# This setting determines how often (in seconds) Nagios will
|
||||
# check the "freshness" of service check results. If you have
|
||||
# disabled service freshness checking, this option has no effect.
|
||||
|
||||
service_freshness_check_interval=60
|
||||
|
||||
|
||||
|
||||
# SERVICE CHECK TIMEOUT STATE
|
||||
# This setting determines the state Nagios will report when a
|
||||
# service check times out - that is does not respond within
|
||||
# service_check_timeout seconds. This can be useful if a
|
||||
# machine is running at too high a load and you do not want
|
||||
# to consider a failed service check to be critical (the default).
|
||||
# Valid settings are:
|
||||
# c - Critical (default)
|
||||
# u - Unknown
|
||||
# w - Warning
|
||||
# o - OK
|
||||
|
||||
service_check_timeout_state=c
|
||||
|
||||
|
||||
|
||||
# HOST FRESHNESS CHECK OPTION
|
||||
# This option determines whether or not Nagios will periodically
|
||||
# check the "freshness" of host results. Enabling this option
|
||||
# is useful for ensuring passive checks are received in a timely
|
||||
# manner.
|
||||
# Values: 1 = enabled freshness checking, 0 = disable freshness checking
|
||||
|
||||
check_host_freshness=0
|
||||
|
||||
|
||||
|
||||
# HOST FRESHNESS CHECK INTERVAL
|
||||
# This setting determines how often (in seconds) Nagios will
|
||||
# check the "freshness" of host check results. If you have
|
||||
# disabled host freshness checking, this option has no effect.
|
||||
|
||||
host_freshness_check_interval=60
|
||||
|
||||
|
||||
|
||||
|
||||
# ADDITIONAL FRESHNESS THRESHOLD LATENCY
|
||||
# This setting determines the number of seconds that Nagios
|
||||
# will add to any host and service freshness thresholds that
|
||||
# it calculates (those not explicitly specified by the user).
|
||||
|
||||
additional_freshness_latency=15
|
||||
|
||||
|
||||
|
||||
|
||||
# FLAP DETECTION OPTION
|
||||
# This option determines whether or not Nagios will try
|
||||
# and detect hosts and services that are "flapping".
|
||||
# Flapping occurs when a host or service changes between
|
||||
# states too frequently. When Nagios detects that a
|
||||
# host or service is flapping, it will temporarily suppress
|
||||
# notifications for that host/service until it stops
|
||||
# flapping. Flap detection is very experimental, so read
|
||||
# the HTML documentation before enabling this feature!
|
||||
# Values: 1 = enable flap detection
|
||||
# 0 = disable flap detection (default)
|
||||
|
||||
enable_flap_detection=1
|
||||
|
||||
|
||||
|
||||
# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
|
||||
# Read the HTML documentation on flap detection for
|
||||
# an explanation of what this option does. This option
|
||||
# has no effect if flap detection is disabled.
|
||||
|
||||
low_service_flap_threshold=5.0
|
||||
high_service_flap_threshold=20.0
|
||||
low_host_flap_threshold=5.0
|
||||
high_host_flap_threshold=20.0
|
||||
|
||||
|
||||
|
||||
# DATE FORMAT OPTION
|
||||
|
||||
Reference in New Issue
Block a user